ChatterBank2 mins ago
DIY
Just a quickie!About to buy a new blade, How many teeth is best on a Hand held circular saw when for general use. Blade diameter 185mm
I have just put a new basin in my en-suite. Then I dropped something in it and now it has a very fine crack on the inside. Can I repaire with sealant? Would it work?
My wooden garden shed is leaning sharply to the right,how do i put it right? I had shelves fixed to the left side of the shed and towards the rear of the shed,which i have now removed. would these...
Water is coming from my son's overflow pipe on his expansion tank in his loft. I have checked in the loft and found the following. The float valve appears o.k but the expansion pipe that is above it...
My son is doing an art project exam which is 5 hrs long. He needs to stick various household objects like bits of circuit board, wires, plastic bottles tops onto a flat surface like hardboard. We're...
I have recently purchased a new plasma tv with free view, the picture keeps breaking up all the time and is not great to watch, so I am going to upgrade the aerial to a "high gain" one...
while using my washer today it worked for about 5mins then it started toslow down and rev up again constantly if i removed the jet attachment the motor would run normal and water came out the end of...
Hi all
When bleeding radiators, do I do it while the heating is on or off? Also I have heard I start downstairs first. Is this correct?
Thanks in advance...
I need to half-tile my fully tiled kitchen and paint the top half. I know it's not the most professional thing to do but removing all the old tiles is a bit daunting, so can I fix plasterboard over...
I thought i would let you both know i have sorted the wood turning problem i had,i have bought a basic lathe this morning,set it up in the shed and made my first wheel.Her indoors put a dampener on it...
i want to lighten a paint i have bought but its matt, so can i use vinyl silk to do the job, have mixed paint before but only if they have both been vinyl silk, so if matt and silk can be mixed ok has...
i have an oil fired central heating system and although it is heating my radiators ok i have just noticed that my water is luke warm ...help
I would like to ask a plumber to replace two sets of taps.
What should I expect to pay them for this?...
I am currently renovating a stool and need to replace one of the legs. Making the leg is not a problem but what I would like to know is whether there is now any superior wood glues that I could use to...
I have been following a thread on another forum in which a guy reported that the neutral bar on a fused board was at times "glowing hot" At other times, when a neutral was disconnected there...
Hi I am trying to get staples for a copydex staple gun model 2000 staple number is number 101, Rexel used to make these, but I am not having any luck obtaining these and do not want to buy a new...
After noticing an unpleasant smell from the shower waste I used the plunger to attempt to clear any blockage. When I did so the water coming from the waste was inky black and when I rinsed this away I...
In an existing installation in a small boat yard, pyro cabling was used to feed light poles for external lighting. A feed from the distribution board went to the first pole and then, jointed out...
The lockout lamp on my oil fired combi boiler came on yesterday and, as a consequence, the heating went off. Before you ask, yes, we have got oil in the tank. Any suggestions as to what it might be...
Any tips on how to drill 5mm holes in 4mm glass. Thanks