Donate SIGN UP

wallpapering

Avatar Image
judrop | 17:16 Tue 16th Dec 2008 | DIY
11 Answers
my new wall paper won't stick properly, has it something to do with the wall being previously painted with a satin paint? if so, whats the remedy? would sugarsoap help?
Gravatar

Answers

1 to 11 of 11rss feed

Best Answer

No best answer has yet been selected by judrop. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
-- answer removed --
Rub the wall with a medium sandpaper .

You could also try coating the walls , sizeing them , with a coat of thinne down paste.


Its all in the preperation.


D T H�?�
Hi judrop, if it was painted with just a normal satin emulsion there should be no problem and the paper should stick but maybe it was an eggshell satin finish which would be a oil based paint. I would agree with the other replies and give the walls a good sanding, then size the walls. As legendis.god says it really is all in the preparation. If you do this and it still isn't sticking properly try using a ready mixed heavy duty paste and make sure that you get the paste right to the edge of the paper.
Question Author
HI all, I've just looked at the old tin of paint, and its actually silk, does this make a difference to any of your replies??
I'd cross-line the walls,then paper them. BTW, I'm a decorator.
Hi jud just a quick rub with this toolhttp://www.screwfix.com/prods/33586/Decorating -Sundries/Decorating-Sundries/Pole-Sander;jses sionid=0IU5CANEWISNKCSTHZOCFEY use medium paper then apply a 4" brush coat of diluted approx 50/50 PVA (uni bond) let it dry then just hang your paper as normal next day hth Tez
If there is no suction on the wall (bare untreated plaster) then you are wasting your time using PVA. As the poster says, the wall has silk emulsion on it. To eliminate any chance of the joints on the paper opening up whilst it is drying(caused by the silk finish emulsion), he should cross-line the wall.
Cross-lining not only hides imperfections in the substrate, it also gives you a uniform surface to hang your paper to.
As carrust says cross lining the walls first can help the paper to stick and it also hides a lot of blemishes in the walls. It is fairly quick and easy to do and gives good results. I think carrust got the one thing mixed up though and that is (bare untreated plaster) has got a lot of suction. Probably going on the previous answer about PVA.
Question Author
Thanks for all of your help :)
you need to provide a key, even for the lining paper, and I assumed with the least fuss/cost hth Tez
get DIY people to do it - that's what they're there for! ;)

1 to 11 of 11rss feed

Do you know the answer?

wallpapering

Answer Question >>