Film, Media & TV2 mins ago
plaster...
10 Answers
I'm having a room and plastered / skimmed today, and my plasterer reckons that if I use a good paint, there is no preperation needed proir to painting over the new surface. Anyone know of, or got any experiences of this not being the case?
Answers
Best Answer
No best answer has yet been selected by MORELLO. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.It is a lot quicker to slap on a mis-coat (half water half paint ) than it is to fix peeling patches. I have done it once , straight to paint, never again. I actually use half water half pva myself ( b and q -el cheapo - pva is just the job ) Don't start until the plaster has cured to the light pink tone that means it is dry.
Back in the 1950s, council houses had plastered walls that were decorated with a direct application of distemper paint. (No emulsion or vinyl paints in those days!). So there's no problem about direct application. I'd go with Carrust and use a thinned paint as a seal. If you look on most cans, they'll advise just this.
My uncle has been a plasterer for 25 years and he is an excellent one. He gave my dad some paint called obliterating paint a while ago and this goes straight on the plaster and provides an excellent coat. so good in fact i used the cream one and didnt paint over it after i used it the colour was so nice.
That paint has been on for 2 years and there are no problems with it. Maybe look at plasterers suppliers to see if you can get some
That paint has been on for 2 years and there are no problems with it. Maybe look at plasterers suppliers to see if you can get some