Crosswords2 mins ago
Washing Machine
6 Answers
Hello all, I wonder if you might be able to help with my washing machine before I batter it with a pitchfork in the style of Basil Fawlty!
It is around 5 years old, and is a Beko model. It has always been fine until recently. Over the last few months it has finished its cycle but still been full of soapy water.
It started doing it very infrequently. Removing the lower plate and unscrewing the filter cap revealed a load of fluff and 20p (!) and a couple of gallons of water. I therefore thought that by unclogging this I had solved the problem.
The issue has become more frequent to the point where it is doing it every other cycle and there is nothing but water coming out (no debris in the filter). Is there anything I, the layman can do without calling someone out to it at great expense, or replacing it at greater expense?
All answers gratefully received, thank you.
It is around 5 years old, and is a Beko model. It has always been fine until recently. Over the last few months it has finished its cycle but still been full of soapy water.
It started doing it very infrequently. Removing the lower plate and unscrewing the filter cap revealed a load of fluff and 20p (!) and a couple of gallons of water. I therefore thought that by unclogging this I had solved the problem.
The issue has become more frequent to the point where it is doing it every other cycle and there is nothing but water coming out (no debris in the filter). Is there anything I, the layman can do without calling someone out to it at great expense, or replacing it at greater expense?
All answers gratefully received, thank you.
Answers
Best Answer
No best answer has yet been selected by oldhamfan. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.check round the impeller/motor shaft carefully, I had one of those clear plastic straps off a ladies dress caught round one, it was hard to spot.
is the connector on securely? does the rotor turn easily by hand? can you 'force' a drain cycle by turning the program knob or does it not have one?, if it does, see if you can hear/feel the drain pump running.
Be careful doing this and if you are in any doubt, call a qualified tradesman.
is the connector on securely? does the rotor turn easily by hand? can you 'force' a drain cycle by turning the program knob or does it not have one?, if it does, see if you can hear/feel the drain pump running.
Be careful doing this and if you are in any doubt, call a qualified tradesman.