ChatterBank1 min ago
Cutting acrylic
3 Answers
I need to cut some 5mm acrylic sheet this weekend for my fish tank. Any idea what to cut it with ? It doesn't have to be particularly pretty. Thought about scoring it several times with a stanley blade and seeing if it'll snap, jig-saw ? fine tooth saw or hacksaw ? or even a hot wire ?
Any suggestions welcome.
Any suggestions welcome.
Answers
Best Answer
No best answer has yet been selected by hammerman. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
-- answer removed --
To save going to any expense as you already have a stanley knife...
Stick masking tape along the sheet where you will be cutting....draw your line on it.
Get a straight metal edge and place it along the line...
Score along the straight edge with your stanley knife...a few times.
Now do the same on the other side...applying tape etc.
Place the sheet along the edge of a table or work bench and apply pressuere directly on the scored line.
When it snaps you will have a clean straight edge...!
Stick masking tape along the sheet where you will be cutting....draw your line on it.
Get a straight metal edge and place it along the line...
Score along the straight edge with your stanley knife...a few times.
Now do the same on the other side...applying tape etc.
Place the sheet along the edge of a table or work bench and apply pressuere directly on the scored line.
When it snaps you will have a clean straight edge...!