Washing Machine Drum -Too Forward After Repair

tali1 | 20:41 Tue 31st May 2016 | How it Works

8 Answers

Replaced bearings on washing machine- but have a new problem now , the drum is too forward.The door catches it and it makes a noise(so it is not an unbalanced load problem) .Checked everything and i can't find anything wrong in putting it back together.

Probably Posted In Wrong Section?

Reward And Answers

Answers

1 to 8 of 8

Best Answer

No best answer has yet been selected by tali1. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.

EDDIE51

Wrong bearings or bearings not located correctly in the housing.

beso

Murphy's Law:

If something can be assembled wrongly, it will be.

TWR

This may sound "Oh well" is the bearing the right way in? are the balance Springs Hooked in place correctly?

tali1

Question Author

Is it actually possible to fit bearings incorrectly? In fact , you would have to make a determined effort to do so ?
Springs hooks have been tried all ways - but to no avail

TWR

Regards the bearings, just a thought, did you check the bearing for the size before inserting?

EDDIE51

The bearings may be the same diameter so they fit but a millimeter or two thicker. They come in a variety of width/thickness for the same diameter.

TWR

Did you check the compatible new bearing Tali? when you open the door does the Drum look central? if all looks ok, is there anything obstructing?

tali1

Question Author

A friend readjusted the drum and it seems to be fine.He says it is impossible to fit wrong bearings -although he is speaking as someone with lots of experience who can tell them apart at a glance

1 to 8 of 8

Do you know the answer?