Film, Media & TV0 min ago
Yamaha SR 500
4 Answers
This bike is very hard to kickover and start,I have been told a new carb would do the trick,any ideas or suggestions. Thankyou.
Answers
Best Answer
No best answer has yet been selected by chickens. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Your ignition timing may be too advanced. Is your oil too viscous? Is your engine a high-miler in need of a rebore? I don't think a new carburettor (expensive) will solve the problem.
Is the engine easier to kick-over and start when it's hot? Does it rev freely when it's started?
Sorry, there seem to be more questions than answers here!
Is the engine easier to kick-over and start when it's hot? Does it rev freely when it's started?
Sorry, there seem to be more questions than answers here!
You might find something here to help......
http://www.thumperpage.com/articles/sr500faq.h tml
If not just Google Yamaha SR 500, lots of sites.
A lot of big 4 strokes are hard to start especially when hot, even when new, Oil won't make any difference or new carb, does it have a valve lifter?
http://www.thumperpage.com/articles/sr500faq.h tml
If not just Google Yamaha SR 500, lots of sites.
A lot of big 4 strokes are hard to start especially when hot, even when new, Oil won't make any difference or new carb, does it have a valve lifter?
this bike should have a auto valve compressor that is to aid atartingbut be warned the sr was a pig to start especially when hot but a tip is to stand on the pegs and s l o w l y turn the engine until its just past the compression stroke( it will be hard to turn over then it will go easy ) it then is up to you to give it a bootfull and kick it through a full swing this is an art perfected by old british bikers! if you think its tricky the xt was the same only more so as you were usually up to your eyes in mud!