Quizzes & Puzzles9 mins ago
screen just goes black?!
7 Answers
hi,
heres hoping someone might be able to help please.
occasionally, as of late, ive been in the middle of doing something on my laptop and all of a sudden the screen has just gone black!! it seems like the programmes are still running behind it, i just cant get to them! no matter what i press click or do, nothing brings back what was on my screen, so all im left to do is to press the power button and start up again.... grrrrrrrr.
any ideas why this happens please? and is there a way i can get back to what i was doing without losing everything becuase ive had to switch off?
thank you in advance :o)
heres hoping someone might be able to help please.
occasionally, as of late, ive been in the middle of doing something on my laptop and all of a sudden the screen has just gone black!! it seems like the programmes are still running behind it, i just cant get to them! no matter what i press click or do, nothing brings back what was on my screen, so all im left to do is to press the power button and start up again.... grrrrrrrr.
any ideas why this happens please? and is there a way i can get back to what i was doing without losing everything becuase ive had to switch off?
thank you in advance :o)
Answers
Best Answer
No best answer has yet been selected by looobylooo. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.If possible try the external monitor port with a working monitor....the port will either be on the side or on the back of your laptop.
Make sure the second monitor is getting a signal....most will say something like 'No Signal Input" if it isn't.....most laptops use Fn + F5 to scroll through the output options of the second monitor but you may have to consult your manual on that one.
If you can replicate the problem and the second monitor stays on then we can assume that the problem lies within the screen itself and is not software related.....if the second monitor goes off too then it will be a software issue rather than a hardware problem.
If you find the second monitor is ok and stays on, try reducing the brightness of the laptop screen to minimal....again this is usually a Fn + key combination.
If you can then turn OFF the screen backlight (yet another Fn + key combo) and then back ON again, and the screen comes ON, if a bit dim, then the problem lies with either the CCFL backlight tube or the inverter that powers it.
Inverters are expensive but very easy to change, CCFL tubes are very cheap but a right pain to fit...they are extremely fragile.
A way to test if this IS the problem is to slowly increase the brightness of the screen (if it works at all) and see if it goes off again at a certain brightness....this is a sure way to tell if it's backlight trouble (or inverter).
If the second monitor goes off too then it's more likely a software issue and this could be any number of things. The power management has already been mentioned and would 90% of the time be spot on...but the fact that the screen doesn't come back on with a key-stroke or mouse-move seems to indicate it may be a little more deep-rooted.
Try the second monitor first and see if it gives you any indication.
Regards.
Make sure the second monitor is getting a signal....most will say something like 'No Signal Input" if it isn't.....most laptops use Fn + F5 to scroll through the output options of the second monitor but you may have to consult your manual on that one.
If you can replicate the problem and the second monitor stays on then we can assume that the problem lies within the screen itself and is not software related.....if the second monitor goes off too then it will be a software issue rather than a hardware problem.
If you find the second monitor is ok and stays on, try reducing the brightness of the laptop screen to minimal....again this is usually a Fn + key combination.
If you can then turn OFF the screen backlight (yet another Fn + key combo) and then back ON again, and the screen comes ON, if a bit dim, then the problem lies with either the CCFL backlight tube or the inverter that powers it.
Inverters are expensive but very easy to change, CCFL tubes are very cheap but a right pain to fit...they are extremely fragile.
A way to test if this IS the problem is to slowly increase the brightness of the screen (if it works at all) and see if it goes off again at a certain brightness....this is a sure way to tell if it's backlight trouble (or inverter).
If the second monitor goes off too then it's more likely a software issue and this could be any number of things. The power management has already been mentioned and would 90% of the time be spot on...but the fact that the screen doesn't come back on with a key-stroke or mouse-move seems to indicate it may be a little more deep-rooted.
Try the second monitor first and see if it gives you any indication.
Regards.
You're welcome.
One other thing you could do to try and narrow this down is when it happens again take a close look at the screen......you may need to get a torch or take the laptop to a window or something and try to see if the screen is displaying the image but just isn't being illuminated.
You need a strong light source but it is possible to see by moving the screen at different angles if there is still an image on there. Obviously if the screen is completely free from anything then it's something more serious.
If you have an image then it's 90% probable that it's the backlight that's gone...or the inverter.
Good luck.
Regards.
One other thing you could do to try and narrow this down is when it happens again take a close look at the screen......you may need to get a torch or take the laptop to a window or something and try to see if the screen is displaying the image but just isn't being illuminated.
You need a strong light source but it is possible to see by moving the screen at different angles if there is still an image on there. Obviously if the screen is completely free from anything then it's something more serious.
If you have an image then it's 90% probable that it's the backlight that's gone...or the inverter.
Good luck.
Regards.