how to locate my hi speed usb 2.0 port on base unit

[Elaine]

I have a fujitsu siemens scaleo P 2662 base unit and want to find my hi speed port.

Thanks

[boxtops]

It'll either be on the front behind a little door (as ours is) or one of the sockets at the back. Do you still have the manual/instructions which came with the base unit?

[Elaine]

yes I do, but I've looked through it and can't see where it would be. There is a port on the front and 4 on the back.

[sandyRoe]

Would all USB ports not operate at the same speed?

[boxtops]

I haven't noticed any difference in performance, whichever port we use.

[rojash]

If you mean Scaleo Pi 2662 then all the USB ports are USB 2.
If you mean SCALEO P 2662 then (at least according to the spec I found, dated 2004), then none of the ports are USB 2.

You can check that at least some are USB 2 by opening Device Manager, checking under "Universal Serial Bus Controllers" and looking for the word "Enhanced". If it's there, at least some of your ports are USB 2 (and probably all of them). If it's not, then you don't have any USB 2 ports.

[Elaine]

thanks its a Pi2662 and only 1 is enhanced. I was backing up data to an external hard drive using a port on the back and it was transferring at 900kb/sec but I;ve now switched to the one on the front and it's doing it at 15.5mb/sec. Thanks for all your help.