Quizzes & Puzzles9 mins ago
US to UK Plug Adapter
13 Answers
I've bought something on eBay, from the US. Has ratings of 117Volts AC, 20Watts or less, and 50-60Hz.
Has a two pin plug, but comes with a note saying that it has a "polarized line cord plug," (one of the pins is slightly wider than the other, which is apparently the ground side).
Obviously I need an adapter to convert the voltage, but on most adapters I've seen that go from a US plug to a UK one, they don't mention anything about the polarized line.
Would something like this do?
http://www.amazon.co.uk/exec/obidos/ASIN/B0000TI46S/ref= br_lf_li_1_2/202-4476353-2925448
Has a two pin plug, but comes with a note saying that it has a "polarized line cord plug," (one of the pins is slightly wider than the other, which is apparently the ground side).
Obviously I need an adapter to convert the voltage, but on most adapters I've seen that go from a US plug to a UK one, they don't mention anything about the polarized line.
Would something like this do?
http://www.amazon.co.uk/exec/obidos/ASIN/B0000TI46S/ref= br_lf_li_1_2/202-4476353-2925448
Answers
Best Answer
No best answer has yet been selected by fo3nix. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.The original US power socket designed for this type of plug is now obsolete anyway, but as you say the wider pin is meant to be the neutral, the easiest way around the problem is to buy a 230/110vac isolating transformer, then it will not matter which is the live and which is the neutral on the 110vac side. Make sure that you buy an isolating transformer where the input and output windings are completely electricaly seperated and NOT a autotransformer which is not isolated between the input and the output.
I have ordered lots of r/c equipment from the states and use this adaptor:
http://www.beststuff.co.uk/voltage_conversion.htm
You could perhaps telephone the helpline on the site? -sorry, I know thats obvious and not much help. qapmoc, I dont know much about transformers but I thought ALL were isolated from input and output - there being 2 seperate windings not electrically connected. The changes in the magnetic field induce current/voltage from primary to secondary winding.
Here's where I get my adaptors from;
http://www.threedoubleyou.com/convertpower.htm
scroll down the page,the USA/UK one near the bottom.
http://www.threedoubleyou.com/convertpower.htm
scroll down the page,the USA/UK one near the bottom.