Donate SIGN UP

Right fuse for Plug

Avatar Image
doddsredoubt | 17:13 Sat 25th Jul 2009 | Technology
2 Answers
Yesterday when I was using my computer it literally went off,and I thought we had a power cut but on chequeing the electricity found it was working.
My question is I found the fuse in my Dell Desktop had blown,and when I took it out the fuse was 10amps and I have never seen an 10amp fuse before so I put in a 13amp fuse in and the computer is working perfectly.
But is 13amp too high,or should I only be putting a 5amp in.

Thankyou for any help.
Gravatar

Answers

1 to 2 of 2rss feed

Best Answer

No best answer has yet been selected by doddsredoubt. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
For safety the fuse should be the smallest which will handle the power.

A 1 amp fuse can pass 230 watts at 230 Volts, which should be enough for any computer. If the fuse was 10 amps then perhaps it was after the voltage regulator: 10 amps at 12 Volts would be 120 Watts.
Question Author
Thankyou Rev.Green,for clarifying the matter for me.

Thankyou for your help much appreciated.

1 to 2 of 2rss feed

Do you know the answer?

Right fuse for Plug

Answer Question >>