Daihatsu Terios 1.5 2009 Abs Warning Light Staying On

[Grumpy23]

staying on after changing one left front wheel bearing and Front brake pads. I have fitted the bearing the right way round for ABS pick-up to detect on the rubber seal side which is slightly magnetic.

[Hymie]

I know that some vehicles require the warning light to be reset using an OBD diagnostic tool after the offending component has been fixed/replaced.

This could be your problem.

[tonyav]

I have a feeling that Hymie is right and the warning light most probably needs resetting.
Have you tried using your brakes to see if the ABS is working ( ie braking sharply as in an emergency stop ) ?.

[douglas9401]

I would try disconnecting the negative terminal of the battery and leaving it off for 10 minutes to see if that resets everything before consulting a highwayman with a machine.

[Hymie]

Anyone who owns a vehicle manufactured within the last 20 years should search on line for the location of the vehicle’s OBD port and buy one of these:-

http://www.ebay.co.uk/itm/2017-Universal-Car-Fault-D900-Code-Reader-OBD2-EOBD-CAN-Diagnostic-Scanner-Tool-/302304028726?hash=item4662b96836:g:A9wAAOSwdjNZCZ64

It will pay for itself after one use – and avoid the need to part with any money to a highwayman.

There are cheaper versions available – but I have one of these and can recommend it.