ChatterBank4 mins ago
Radiators
1 Answers
The curved radiator is now only geting hot at the top.
I had a new combi fitted upstairs and I think the water flows a different route because the boiler was downstairs previously.How do I tell which way it flows?
I had a new combi fitted upstairs and I think the water flows a different route because the boiler was downstairs previously.How do I tell which way it flows?
Answers
Best Answer
No best answer has yet been selected by JoeyB. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Joey, When the system is cold, switch heating on. Feel both pipes that feed the radiator. The one that starts to heat up first is the 'flow', the other one is the 'return'.
The system will have been drained down when the boiler was replaced , it is possible that a certain amount of sludge has found its way into the radiator, blocking up the bottom section of the radiator when the system was re filled, although at least two system flushes should have been carried out ( one cold, one hot ).
Suggest you ask your installer to call back to rectify the problem.
Hope this helps.
The system will have been drained down when the boiler was replaced , it is possible that a certain amount of sludge has found its way into the radiator, blocking up the bottom section of the radiator when the system was re filled, although at least two system flushes should have been carried out ( one cold, one hot ).
Suggest you ask your installer to call back to rectify the problem.
Hope this helps.