Donate SIGN UP

Windscreen washers

Avatar Image
richard1971 | 16:01 Tue 18th Mar 2008 | Motoring
2 Answers
Hi i have a problem with my windscreen washers on my escourt w reg. they only squirt on low presure or not at all. when i first start the car they will squirt full presure for about 3-5 pumps then i have to wait again for few mins to get them going again, but they only come out at low presure or not at all. I dont think they are blocked! the motors going when i press them, i wonded if they needed bleeding or somat like that. Please help this is driving me mad thanks in advance . Cheers Rch...
Gravatar

Answers

1 to 2 of 2rss feed

Best Answer

No best answer has yet been selected by richard1971. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Hello pull the pipe off the motor and check the pressure and then you can see if the motor is okay . Then pull the pipes off the jets and blow from the pump end . If all is well then the jets are blocked
Also you can use a pin to clean out the hole that the water comes from. Sometimes they get clogged up with dirt and grit!!

1 to 2 of 2rss feed

Do you know the answer?

Windscreen washers

Answer Question >>