Twenty Two Years And Counting.
ChatterBank5 mins ago
Chemistry
which chemical will absorb moisture in a desiccator?
Answers
1 to 4 of 4
Best Answer
No best answer has yet been selected by nagz. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
-- answer removed --
There is no such thing as a "normal absorbent". The selection of a desiccant is tailored to a particular application as they are not universal for all purposes.
Silica Gel is a highly porous form of Silicon Dioxide and consequently it is acceptable to consider it a "chemical".
However, I would suggest that if you asked a chemist this question, the first answer that would come to mind is anhydrous Calcium chloride, which is a highly hygroscopic compound in the form of white crystals, powder or flake. addition,
The compound and its solutions absorb moisture from the air at various rates depending on Calcium Chloride concentrations, relative humidity and vapour pressure of water in the air, temperature, surface area of exposed material, and the rate of air circulation. At 40% and 95% relative humidity and 25�C, one gram anhydrous calcium chloride may absorb about 1.4 g and 17 g water.
Yes, there are more modern dessicants available such as molecular sieves, but their selection can be problematical for particular applications due to the grade sizes and often, the absorbency factor is little different from that of Calcium Chloride. In addition, Calcium Chloride is probably the cheapest dessicant available, which is one of the reasons why so much of it is used for commercial applications.
Finally, Silica Gel is often doped with substances that enable the colour change outlined by EDDIE51. These substances along with additional compounds such as fungicides and mould inhibitors preclude the use of Silica Gel for many applications in a desiccator.
Silica Gel is a highly porous form of Silicon Dioxide and consequently it is acceptable to consider it a "chemical".
However, I would suggest that if you asked a chemist this question, the first answer that would come to mind is anhydrous Calcium chloride, which is a highly hygroscopic compound in the form of white crystals, powder or flake. addition,
The compound and its solutions absorb moisture from the air at various rates depending on Calcium Chloride concentrations, relative humidity and vapour pressure of water in the air, temperature, surface area of exposed material, and the rate of air circulation. At 40% and 95% relative humidity and 25�C, one gram anhydrous calcium chloride may absorb about 1.4 g and 17 g water.
Yes, there are more modern dessicants available such as molecular sieves, but their selection can be problematical for particular applications due to the grade sizes and often, the absorbency factor is little different from that of Calcium Chloride. In addition, Calcium Chloride is probably the cheapest dessicant available, which is one of the reasons why so much of it is used for commercial applications.
Finally, Silica Gel is often doped with substances that enable the colour change outlined by EDDIE51. These substances along with additional compounds such as fungicides and mould inhibitors preclude the use of Silica Gel for many applications in a desiccator.
-- answer removed --
1 to 4 of 4
