ChatterBank5 mins ago
New Clutch - problem??
9 Answers
I've just had a new clutch fitted today but now when I drive the car it seems to over rev a lot when I depress the clutch to change gears (upwards). I stalled the car 3 time because it was so aggressive! Is this a problem with the new clutch or is it something that will go away after it 'beds in'?
Many thanks
Many thanks
Answers
Best Answer
No best answer has yet been selected by ruthandsam. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.I'm not really convinced it is the new clutch which is the problem but the problem has only appeared after having the replacement put in.
Now when I change gear from 1st to 2nd the car drives by itself, ie: does not need the accelerator. Also when I press the clutch down, the car revs so high I can hardly keep it under control, it is as if something is now wrong with the accelerator. Are the two problems connected?
Now when I change gear from 1st to 2nd the car drives by itself, ie: does not need the accelerator. Also when I press the clutch down, the car revs so high I can hardly keep it under control, it is as if something is now wrong with the accelerator. Are the two problems connected?
Sounds like the throttle cable or linkage is sticking, if you just rev the engine while stationary do the revs die straight back down to idle again?
If it is the cable or linkage sticking then it's probably down to it not being put back together correctly in some why, as they'd probably have to remove it to get the engine out to change the clutch.
If it is the cable or linkage sticking then it's probably down to it not being put back together correctly in some why, as they'd probably have to remove it to get the engine out to change the clutch.