Crosswords1 min ago
Lights on dashboard.
This might be a silly question but when a car gets put on one of the diagnostic machine thingy's would it pick up if any of the bulbs on the dashboard are not working? Petrol light etc?
Answers
Best Answer
No best answer has yet been selected by ummmm. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.It its got the digital display on the dash for the mileage you can put the dashboard into a test mode.
Put the key in the ignition but don't turn it.
Hold down the trip reset button
Start the car while still holding the trip reset and keep it held in for about 10 seconds until the display shows "test"
Then you can let go of the button, from then on each press of the button changes through different test modes... as below..
* 1.Shows a Gauge Sweep
* 2. Shows all 8's on the LCD (LCD TEST)
* 3. Illuminates all the bulbs on the dash
* 4. Displays hexadecimal value for ROM level
* 5. Displays the hexadecimal value for EE level
* 6. Shows DTC (Diagnostic Trouble Code)
* 7. Digital Speedometer - mph
* 8. Digital Speedometer - kph
* 9. N/A
* 10. Digital tachometer
* 11.Fuel volume
* 12. Engine coolant temperature
* 13. Battery voltage
* 14. ABS fail
* 15. Electronic brake distribution (EBD) failure
* 16. Illumination
* 17. Crank Sense
So press three will light up the fuel light to see if the bulb works.
(the above works on a lot of fords as well as the KA... the digital speedo in KPH is handy if you're aboard.)
Put the key in the ignition but don't turn it.
Hold down the trip reset button
Start the car while still holding the trip reset and keep it held in for about 10 seconds until the display shows "test"
Then you can let go of the button, from then on each press of the button changes through different test modes... as below..
* 1.Shows a Gauge Sweep
* 2. Shows all 8's on the LCD (LCD TEST)
* 3. Illuminates all the bulbs on the dash
* 4. Displays hexadecimal value for ROM level
* 5. Displays the hexadecimal value for EE level
* 6. Shows DTC (Diagnostic Trouble Code)
* 7. Digital Speedometer - mph
* 8. Digital Speedometer - kph
* 9. N/A
* 10. Digital tachometer
* 11.Fuel volume
* 12. Engine coolant temperature
* 13. Battery voltage
* 14. ABS fail
* 15. Electronic brake distribution (EBD) failure
* 16. Illumination
* 17. Crank Sense
So press three will light up the fuel light to see if the bulb works.
(the above works on a lot of fords as well as the KA... the digital speedo in KPH is handy if you're aboard.)
-- answer removed --