Shopping & Style17 mins ago
Wetwall
11 Answers
We are planning a new bathroom, and our builder has recommended WetWall rather than ceramic tiles on the walls. My OH is all for it but I am more sceptic. I believe it is laminated MDF, so where it has to be cut to fit, surely damp will get inside the sheets? Anyone on here used it?
Answers
Best Answer
No best answer has yet been selected by Oleanda. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.We have it in our bathroom around the shower.
Brilliant stuff. No grout to discolour, easy to wipe down and clean. The resin in the laminate is such a high quality they give a lifetime guarantee. More expensive than tiles but goes up much faster, so you save on labour charges.
I would recommend it every time above tiles.
Brilliant stuff. No grout to discolour, easy to wipe down and clean. The resin in the laminate is such a high quality they give a lifetime guarantee. More expensive than tiles but goes up much faster, so you save on labour charges.
I would recommend it every time above tiles.
It is perfectly feasible that the SURFACES will be water-proof - as are ceramic tiles with water-proof grout. The issues are going to be at the joints (as with tiles). It seems one fills the joints with silicon sealant (as with tiles).
If you like the finishes available then it seems no less or more likely to leak than a properly-finished tiled surface. But I'm not enough in the tooth to remember avocado-coloured bathroom suites (and worse colours) so just bear in mind that fashions change.
If you like the finishes available then it seems no less or more likely to leak than a properly-finished tiled surface. But I'm not enough in the tooth to remember avocado-coloured bathroom suites (and worse colours) so just bear in mind that fashions change.
I have never used Wetwall, but I have looked at it in a plumbers' showroom. At the internal angles, an aluminium jointing strip was used, that was the full length of the Wetwall sheet. The sheets were slotted into the jointing strip, rather like a mortice and tenon joint. A similar jointing strip was used to cover the outer edges of the sheets. I was assured by the salesman that that was enough to make the whole assembly watertight. There was no mention of using silicone sealant on the aluminium strips.
Good product Oleanda. Used a lot now.
As with all these products, they're only as good as the guy putting them up. If not enough attention is paid to the minutiae of sealing edges etc, then it could give problems.
PVC is another way to go. Completely waterproof and rot proof. Have a look here, and look at the installation videos...............
http:// www.pvc -claddi ng.co.u k/produ cts.php ?cat=Sh ower+Wa ll+Clad ding+Ki ts
As with all these products, they're only as good as the guy putting them up. If not enough attention is paid to the minutiae of sealing edges etc, then it could give problems.
PVC is another way to go. Completely waterproof and rot proof. Have a look here, and look at the installation videos...............
http://