Donate SIGN UP

Changing a washer on a hot tap

Avatar Image
JCS1965 | 15:18 Fri 06th Jul 2007 | DIY
2 Answers
Do I have to drain the hot water tank to do this or is there another way ?
Gravatar

Answers

1 to 2 of 2rss feed

Best Answer

No best answer has yet been selected by JCS1965. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
There Should be a gate valve in the airing cupboard it will have a red or green wheel type handle on it, or a fullbore lever type valve this should be attached high up to the fat pipe that goes into the bottom side of you're hot water cylinder. This should be turned in a clockwise direction until it is closed and will not turn any more This will isolate the hot water without the need for a full drain down.
It depends whether you have a hot tank or not. the method described by gasman is if you do.
if you have a combi-boiler ie no hot tank you have to turn off the cold water into the house

1 to 2 of 2rss feed

Do you know the answer?

Changing a washer on a hot tap

Answer Question >>