Donate SIGN UP

Smoke Alarm

Avatar Image
Oleanda | 13:46 Wed 02nd Aug 2006 | Home & Garden
4 Answers
I have a Kidde smoke alarm. It started "chirpping" so I replaced the battery, but it still "chirped", so I replaced it again, and it's still doing it. I don't have the instruction manual because the alarm was in the house when I moved in, but its not old, there's a sticker on the back, dated June 04. Any ideas?
Gravatar

Answers

1 to 4 of 4rss feed

Best Answer

No best answer has yet been selected by Oleanda. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Have you tried cleaning it out?
We have a network of mains smoke alarms that have all been going off about every 10 minutes despite having their back up batteries replaced, cleaned etc . In the end we got an engineer in who said the thing to do was watch how many times in a minute the red light flashed and if it's very rapid then the alarm itself is faulty. We looked at them all over the house (10) and eventually saw the one that was flashing rapidly in the rear hall. He had to remove that one completely and it's cured it, they're not being triggered anymore. They were only fitted last year so weren't old so maybe yours is just doing the same thing ours was and needs replacing.Hope you get it sorted.
well get some fire men to fit in a new one in because it might have something wrong to it.
Safety first, simply buy a new one instead of messing about, they only cost �5--�10 pounds!

1 to 4 of 4rss feed

Do you know the answer?

Smoke Alarm

Answer Question >>