Donate SIGN UP

boiler works but no hot water

Avatar Image
Thunderchild | 07:01 Wed 28th Sep 2011 | DIY
5 Answers
Well just as i'm going to have a shower before going out on a date me boiler packs in :(

So it all works as though nothing was amiss but no hot water, radiators have water pumped round and the boiler makes most of the noises, but no heat/hot water.

I assume that either the igniter or the valve letting the gas in has broken. Will this be costsly ? (no I'm not insured)
Gravatar

Answers

1 to 5 of 5rss feed

Best Answer

No best answer has yet been selected by Thunderchild. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
What type of boiler?
Question Author
it's a combi boiler, i think most odf the noise it makes without burning is the water pump and the thing that extracts the last heat from the fumes
You could try these steps from this site:-

http://www.videojug.c...you-have-no-hot-water


Troubleshooting: When You Have No Hot Water

Troubleshooting: When You Have No Hot Water : There's nothing more chilling than cold water running from your hot tap. Working out why you don't have any hot water's a hard job, and it'll take you half the day, but this guide will show you how to find the problem yourself.There's nothing more chilling than cold water running from your hot tap. Working out why you don't have any hot water's a hard job, and it'll take you half the day, but this guide will show you how to find the problem yourself.

Step 1: Check power supply

Before you start, make sure that there is power going to the boiler - the panel light should be on, and the pressure gauge should be showing around 1 bar.
Step 2: Pump

Have a quick check to make sure that your pump is running by feeling the side of the pump for motion. You might have to take the side panels off your boiler to get at it. If it doesn't appear to be running, you will need to get a qualified heating engineers in to investigate.
Step 3: Thermostat

You may be facing these cold showers because your thermostat is too low or maybe not even on. Check that the power switch is turned to on and that the thermostat controlling the water temperature is set high enough.
Step 4: Pilot Light

Make sure that the pilot light goes on when needed. If it won't, then your water certainly won't be hot. To re-light it, follow the instructions in the manual or on the side of the boiler.

If you have tried out all our troubleshooting tips and you are still faced with a cold water, give a professional a call.

External Links

www.homeserve.com
http://www.youtube.com/watch?v=_oP1YF6RfIk
Water pressure to low? Again, check pressure guage is showing slightly above
1 bar but then the radiators would'nt be hot would they? Just a thought.
Not very clear ..
Are radiators warming up or not?
No hot water on tap (but water flows)?
What make and model is boiler please?

1 to 5 of 5rss feed

Do you know the answer?

boiler works but no hot water

Answer Question >>