Quizzes & Puzzles40 mins ago
Oil Leakage
10 Answers
I went in my garden shed this morning and was surprised to see engine oil dripping down from a high shelf, where I had several bottles of oil stored.
A couple of the plastic bottles were many years old but it was impossible to see which bottles were leaking due to the fact that the whole shelf was drenched in oil, including the bases of the bottles.
I removed and disposed two of the oldest bottles, assuming it must be them-----so my question is, why did the bottle/s suddenly spring a leak ??.
The weather was cool and sunny and frosty, first thing but nothing too extreme, so I wondered if rodents or something else may have caused the leak.
A couple of the plastic bottles were many years old but it was impossible to see which bottles were leaking due to the fact that the whole shelf was drenched in oil, including the bases of the bottles.
I removed and disposed two of the oldest bottles, assuming it must be them-----so my question is, why did the bottle/s suddenly spring a leak ??.
The weather was cool and sunny and frosty, first thing but nothing too extreme, so I wondered if rodents or something else may have caused the leak.
Answers
Best Answer
No best answer has yet been selected by Chipchopper. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.It depends a bit on the plastic and the oil.
There are many different types of plastic - polyethylene, polypropylene, ABS and so on.
Many of these use additives called plasticisers to make them a bit softer and more pliable.
Mineral oils (and synthetic oils) can dissolve the plasticisers and also some low-density plastics.
WHat I suspect is ging on is that over time, the oil has leached plasticisers out of the plastic and degraded the materials to the point where the plastic gave way.
It's a very slow, gradual process, so the specific weather or temperature on the day of the failure is not that relevsnt - though he process will speed up at higher temperatures.
Probably, if you can recover the offending bottle, you'll find it is more brittle than the top of the bottle, for example.
Hope it helps
There are many different types of plastic - polyethylene, polypropylene, ABS and so on.
Many of these use additives called plasticisers to make them a bit softer and more pliable.
Mineral oils (and synthetic oils) can dissolve the plasticisers and also some low-density plastics.
WHat I suspect is ging on is that over time, the oil has leached plasticisers out of the plastic and degraded the materials to the point where the plastic gave way.
It's a very slow, gradual process, so the specific weather or temperature on the day of the failure is not that relevsnt - though he process will speed up at higher temperatures.
Probably, if you can recover the offending bottle, you'll find it is more brittle than the top of the bottle, for example.
Hope it helps