Crosswords3 mins ago
Answers
Best Answer
No best answer has yet been selected by mrspirite. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Normally a USB memory stick would not have a recycle bin and files deleted from it are instantly deleted straight away. (Though USB hard drives normally do have a recycle bin)
the difference is that most (pretty much all) USB memory sticks have a "removable media bit" set in the device descriptor on the controller whereas external hard drives are seen local drives.
You can easily check, plug a USB memory stick in, then right click on the recycle bin and select properties and if the drive has the removable media bit set on it then it will not show as an extra tap on the recycle bin properties. Plug an external hard drive in and most will show as an extra tab in the properties.
the difference is that most (pretty much all) USB memory sticks have a "removable media bit" set in the device descriptor on the controller whereas external hard drives are seen local drives.
You can easily check, plug a USB memory stick in, then right click on the recycle bin and select properties and if the drive has the removable media bit set on it then it will not show as an extra tap on the recycle bin properties. Plug an external hard drive in and most will show as an extra tab in the properties.
The descrepancy is due to a difference in the measurement units.
Drives are measured in Gigabytes which is 10^9 bytes.
Windows measures in Gibibytes which is 2^30 which is a significantly larger number.
Consequently Windows only reports about 93 percent of the capacity rated in Gigabytes. A 16GB drive shows in Windows as 14.9 GB which is almost exactly what you see.
Drives are measured in Gigabytes which is 10^9 bytes.
Windows measures in Gibibytes which is 2^30 which is a significantly larger number.
Consequently Windows only reports about 93 percent of the capacity rated in Gigabytes. A 16GB drive shows in Windows as 14.9 GB which is almost exactly what you see.
The reason for the difference in units is historical.
When computers started out memory was very small. It reached 2^10 which was 1028. Some bright spark thought of calling it a kilobyte because it was close to 10^3. The error was less than three percent. However taken to 10^30 for the giga scale this error compounded and people begin to notice the big difference.
The SI unit has been misued and the boffins in charge have decreed it as such. They offered kibibyte, mibibyte, gibibyte etc as alternatives. Windows should call their unit gibibytes. They use the GB abbreviation in sizing drives but the correct abbreviation is GiB. In some views you can see the bytes and will notice the difference.
However the old usage, particularly as it is supported by Windows still prevails except in drives where they manufacturer want to use the biggest number they can.
When computers started out memory was very small. It reached 2^10 which was 1028. Some bright spark thought of calling it a kilobyte because it was close to 10^3. The error was less than three percent. However taken to 10^30 for the giga scale this error compounded and people begin to notice the big difference.
The SI unit has been misued and the boffins in charge have decreed it as such. They offered kibibyte, mibibyte, gibibyte etc as alternatives. Windows should call their unit gibibytes. They use the GB abbreviation in sizing drives but the correct abbreviation is GiB. In some views you can see the bytes and will notice the difference.
However the old usage, particularly as it is supported by Windows still prevails except in drives where they manufacturer want to use the biggest number they can.
Flash memory does wear out with multiple cycles. Good drives manage the use and ensure it is spread out over the entire hardware. Others continually rewrite the same place and lead to premature loss of storage capacity.
Flash drives will wear out faster if you work on files stored on them because of the multiple saves. Always copy your work to the hard drive and then back to the flash drive when finished.
Flash drives will wear out faster if you work on files stored on them because of the multiple saves. Always copy your work to the hard drive and then back to the flash drive when finished.
Doesn't solve the problem tho, does it?
It must have been filling up for some reason.
There are viruses and malware that can affect plug-in drives, and will install something on root of the drive.
Anther reason is back-ups of some kind set to store on that drive ...
or data for a program installed.
Best to look at the content, really to establish what it is first!
It must have been filling up for some reason.
There are viruses and malware that can affect plug-in drives, and will install something on root of the drive.
Anther reason is back-ups of some kind set to store on that drive ...
or data for a program installed.
Best to look at the content, really to establish what it is first!