Donate SIGN UP

Dead

Avatar Image
henry1938 | 19:51 Mon 17th Jul 2017 | Technology
36 Answers
i was downloading system restore
accidently cancelled it
now my w10 laptop will not boot up
help please
Gravatar

Answers

21 to 36 of 36rss feed

First Previous 1 2

Avatar Image
this might cure your problem http://pureinfotech.com/repair-master-boot-record-mbr-windows-10/
16:28 Wed 19th Jul 2017
Question Author
hello
opened lappy all seems to be nice and tight
thanks
Question Author
hello fender
ta for info
cannot do anything
lappy will not boot up
do you mean it will not literally will not turn on, is the hd light flashing or any lights at all.
Question Author
hi fender
does not boot up
no lights . plug in battery
battery light shows for about 2 secs
otherwise nothing
if you have tried another charger and had the same result, id say the motherboard is dead or the input socket for the charger is faulty, if you know someone with the same charger you could try there's or buy an after market one off ebay £10 or less, i think its the charge port on laptop ? any good with a solder iron, you can buy the port on ebay solder old one out replace with new one.
Question Author
ta for info
i have asked a few people with dell laptops
they have older versions
so no luck there
so thanks every one for brill help
i will take it to where i bought it from
garantee has run out
so back to mr lewis
thanks again
Question Author
update
took it to shop
found nothing wrong
he pressed the start button several times
before it booted up
ok now
thank s again
Glad you got it sorted without having to spend out on it :)
Well done, Henry!
G'afternoon Henry......I am delighted that you found someone to 'put the boot in' and everything is back in order.

Many thanks for updating us on the matter. I often get frustrated by Computers/Laptops, especially when I can't solve what is sometimes a simple issue.

Hans.
Don't be put off that the shop got it going - as you will have gathered it is a common fault - why else would Dell and other manufacturers have solutions for this listed!

I suspect that time was a factor in it coming back - go figure!
gals you got it sorted, did they say what the fault was
V. Odd for this to be sorted by just pressing the ON button. COuld you have power failure on home plugpoint?
tamborine, that what i was thinking, then it occurred to me, maybe the pwr button was stuck contacts etc, i cannot really say anymore without actually testing it on my bench, but it works again for the op, so that good news

21 to 36 of 36rss feed

First Previous 1 2

Do you know the answer?

Dead

Answer Question >>