Donate SIGN UP

DIY

881 to 900 of 1665

First Previous 42 43 44 45 46 47 48 Next Last

Avatar Image
smartshovon
I have 2 slider in my website. 2nd slider moving automatically but 1st slider (Carousel slider) not moving automatically, it's moving manually. i want it's moving automatically. I use wordpress. and...
Avatar Image
droopydrawers
Our little porch has a small round window set in a wooden frame. When the weather is cold it runs with condensation every morning. We keep a folded tea towel on the sill over night thats always...
Avatar Image
Quinn88
I am in the process of moving out of rented accommodation and have a problem with condensation within two of the upstairs bedrooms. The one room has an air vent built into the wall but no trickle...
Avatar Image
thechauffeur
I intend to take down the ceiling in my garage and put in insulation then replace with new plasterboard. I sometimes watch a programme on Discovery called Holmes on homes which is set in Canada where...
Avatar Image
Aquagility
Do any of you know of an effective solution to the joints wicking moisture through to the inside of the wall?
Avatar Image
sherminator
My shower is leaking and i believe its beacause their is a gap between the base and the wall tiles. I have removed all the existing silicone so I can reseal it buththeir is about a 75mil gab between...
Avatar Image
HowardKennitby
Hi all I have a very old B&D Workmate that needs spare parts. How do I find out which model it is? I have looked all over and cannot see anything. thanks Howie...
Avatar Image
beastmonkey
I have some cast duck heads, that i want to mount on to a piece of board and turn into a coat rack. the screws to fix the heads to the board, will go through the board and then into the duck heads...
Avatar Image
raybush
I'm sure somebody can give advice. My shower cubical has walls that are clad in like plastic planking that sits in a channel on top of the edge of the shower tray.Over the past few years i have...
Avatar Image
whurules
Hi, hope someone can help, has anybody had experience of fitting a cast iron stove? i am considering fitting one in an open fireplace, how easy is it to fit and what else do need ,ie piping up th...
Avatar Image
HowardKennitby
Hi all Does anyone have experience of this sort of ladder? http://www.coopersofs...-ladder-prodst05828i/ I have an instinctive unwillingness to trust myself to anything with so many hinges in it....
Avatar Image
malagabob
Have been told I need to fit strips of stone around edge to stop plaster cracking around inset gas fire.
Avatar Image
peterbaz
hello folks i recently fitted skirting board around my bedroom very successfuly with the help of a miyre board , yhe skirting was 4 inch ant the mitre board did a good job ... my problem is i would...
Avatar Image
axist
Hi all, I Have a year old combi and I want to add rads. of which I have picked up a few. If well flushed, what is the likelihood of damaging the combi? Also, assuming the system uses rads in...
Avatar Image
axist
Hi, I own a London 4 room semi. that I hear could generate £400pw rent. I was building a side conservatory with plastic roof (cost £250). With the new relaxed planning I discovered that I...
Avatar Image
missprim
I have a trolley on wheels with 2 trays attached. The main frame is brown and the trays are yellow! The frame is probably metal covered in plastic and the trays are plastic and they clip onto the...
Avatar Image
jbuttress23
repair polished table top from watermarks
Avatar Image
rosyposy
The cold water pipe is leaking at the back, it seems to be the threads on the plastic connection which brings the water into the washer. The washer itself is very old so I don't think we will be able...
Avatar Image
sandyRoe
I painted 3 new sills a couple of years ago but the paint, particularly on the one that gets most sun, is blistering and flaking off. If I ever get around to painting them again how do I get the...
Avatar Image
jbuttress23
repair polished table top from watermarks

881 to 900 of 1665

First Previous 42 43 44 45 46 47 48 Next Last